2004 IEEE-TTTC

International Conference on Automation, Quality & Testing, Robotics

AQTR 2004 (THETA 14)

May 13 – 15 2004, Cluj-Napoca, Romania

Organizers and Sponsors

DETAILED PROGRAM

Thursday, 13^th May, 2004

8:00 -11:00, 13^th May            Tutorials

(Technical University of Cluj-Napoca, 26-28 G Baritiu Street)

T1. Yervant ZORIAN (Virage Logic , USA)

“Infrastructure IP for SOC” - Room 40

T2. Michel RENOVELL (LIRMM, Fr)

“Structural Testing of SRAM-Based FPGAs” - Room 41

T3. Paolo PRINETTO (Politecnico di Torino, IT)

“Self-Healing in Dependable Systems” - Room 356

T4. Stefan PREITL, Radu Precup, Zsuzsa Preitl (U. “Politehnica” Timisoara, RO) 

“Development of 1-dof and 2-dof Fuzzy Controllers.

Applications on Servo-systems” - Room 359

T5. Joan BATLLE (U. Girona, E)

“The importance of colour features in Computer Vision“ - Room 318

11:30 - 13:30, 13^th May 1PS. Open session and Plenary session I

(Student Cultural House, 1-3 L. Blaga Square, former Pacii Square)

Opening:

· Ioan Stoian - general chairman

· Tiberiu Colosi - general chairman

· Liviu Miclea - program chairman

Invited speakers:

· Michel Renovell (LIRMM, Fr) – vice-chair IEEE Computer Society – Test 

Technology Technical Council

· Yervant Zorian (Virage Logic, USA)

· Joan Batlle  (UDG rector, E)

· Mircea Petrescu (Romanian Academy for Technical Sciences, Ro)

· Doina Banciu (INFOSOC R&D program chair)

· Ioan Dumitrache (SRAIT chair, RO)

· Radu Munteanu (UTCN rector)

· Paul Frank (U. Duisburg, D)

· Paolo Prinetto (Politecnico di Torino, It)

· Florian Udrescu ( IPA SA Bucharest, RO)

Plenary session I

PS1-1	Fault detection and fault-tolerant control – Basis ideas, state of art and perspectives
	Paul. M		FRANK				Universitat Duisburg-Essen , Germany
PS1-2	Intelligent transport from theory to practice
	Doina	BANCIU			National Institute for Research and Development in Informatics
	Gabriela Rodica			Hrin		National Institute for Research and Development in Informatics

15:00 – 17:00, 13^th May       2S. SESSIONS

                                                (Technical University of Cluj-Napoca, 26-28 G. Baritiu Street)

15:00 – 17:00, 13^th May       2S1. Advanced Control. Modeling and Simulation

(part.1)

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 40

Chairmen
Stefan Preitl	"Politehnica" University of Timisoara
Clement Festila	Technical University of Cluj-Napoca
Eva Dulf	Technical University of Cluj-Napoca

2S1-1	Impedance controller development for haptic interfaceig using a hil experimental setup
	Kang	WEN			Department of Mechanical Engineering, University of Ottawa
	Dan	Necsulescu			Department of Mechanical Engineering, University of Ottawa
2S1-2	Modeling and simulation of sodium pantothenate synthesis using CHEMCAD
	Calin		CORMOS				"Babes-Bolyai" University of Cluj-Napoca, Faculty of Chemistry and Chemical Engineering Cluj-Napoca
	Serban		Agachi				"Babes-Bolyai" University of Cluj-Napoca, Faculty of Chemistry and Chemical Engineering Cluj-Napoca
2S1-3	Continous and discrete signal spaces are connected in more interesting ways
	Alex	ZAMFIRESCU					Alternative System Concepts, Inc.
2S1-4	Dynamic networks and switched linear state feedback control
	Mihaela			CISTELECAN			Technical University of Cluj-Napoca
2S1-5	Improving EPSAC Tuning for Processes with Unstable Transmission Zeros
	Draguna			VRABIE		Technical University of Iasi
	Robin			de Keyser		EeSA  Department of Electrical energy, Systems and Automation, Ghent University, Belgium
	Corneliu			Lazar		Technical University of Iasi
2S1-6	Motion control using a model based adaptive predictive algorithm
	Radu			BALAN			Technical University of Cluj-Napoca
	Vistrian			Maties			Technical University of Cluj-Napoca
	Olimpiu			Hancu			Technical University of Cluj-Napoca

15:00 – 17:00, 13^th May       2S2. Advanced Control. Modeling and Simulation

(part2)

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 41

Chairmen
Matei Vanatoru	University of Craiova
Petru Dobra	Technical University of Cluj-Napoca
Mirela Trusca	Technical University of Cluj-Napoca

2S2-1	Practical aspects in modeling and control of rectifying columns
	Matei	VÎNATORU				University of Craiova
	Eugen	Iancu				University of Craiova
	Camelia	Maican				University of Craiova
2S2-2	On the fuzzy control of a class of linear time-varying systems
	Stefan			PREITL		"Politehnica" University of Timisoara
	Radu-Emil			Precup		"Politehnica" University of Timisoara
2S2-3	QFT robust control of biotechnological processes
	Marian	BARBU				"Dunarea de Jos" University of Galati
	Sergiu	Caraman				"Dunarea de Jos" University of Galati
	Emil	Ceanga				"Dunarea de Jos" University of Galati
2S2-4	The stability study of the kalman filter  used in the vectorial control system for the speed of an induction motor
	Olimpiu		STOICUTA			University of Petrosani
	Corneliu		Mandrescu			University of Petrosani
2S2-5	Nonlinear model predictive control of a pilot distillation column. An artificial intelligence approach
	Zoltan K.		NAGY			"Babes-Bolyai" University of Cluj
	Serban P.		Agachi			"Babes-Bolyai" University of Cluj
	Frank		Allgöwer			University of Stuttgart, Germany
2S2-6	Energy efficiency improvement in a water pump station with static converter operation
	Petre-Marian				NICOLAE		Craiova University, Electrical Engineering Dept.
	Lucian			Mandache		Craiova University, Electrical Engineering Dept.
	Gabriel			Vladut		IPA CIFATT Craiova
	Camelia			Cojocaru		IPA CIFATT Craiova
2S2-7	Block schemes for analogical modelling and  numerical simulation through local-iterative  linearization
	Mihai	ABRUDEAN				Technical University of Cluj-Napoca
	Eva	Dulf				Technical University of Cluj-Napoca
	Tiberiu	Colosi				Technical University of Cluj-Napoca

15:00 – 17:00, 13^th May       2S3. Testing

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 356

Chairmen
Dan Steriu	"Politechnica" University of Bucharest
Peter Bikfalvi	University of Miskolc, Hungary
Szilard Enyedi	Technical University of Cluj-Napoca

2S3-1	On an automation tool for complex measurements
	Dorel		AIORDACHIOAIE			"Dunarea de Jos" Galati University
	Herbert		Peremans			Antwerp University, Belgium
	Gabriel		Sirbu			"Dunarea de Jos" Galati University
	Viorel		Nicolau			"Dunarea de Jos" Galati University
2S3-2	Microstepping test board with specialized circuits
	Alexandru			MORAR	“Petru Maior” University of Tg. Mures
2S3-3	Studying and modelling non-linear circuit elements
	Katalin		AGOSTON		“Petru Maior” University of Tg. Mures
2S3-4	Models and characterization of instrument transformers for energy measurement
	Costin		CEPISCA		"Politehnica" University of Bucharest
	Mircea		Covrig		"Politehnica" University of Bucharest
	Horia		Andrei		“Valahia” University Târgoviste
	Valentin		Dogaru		“Valahia” University Târgoviste
	George		Seritan		"Politehnica" University of Bucharest
2S3-5	Software simulation of branch prediction in Intel Pentium processor simulator
	Elena	ZAHARIEVA-STOYANOVA					Technical University of Gabrovo, Bulgaria
2S3-6	Implementation of a multiagent DBIST/Distributed testing solution
	Liviu	MICLEA			Technical University of Cluj-Napoca
	Lucian	Busoniu			Technical University of Cluj-Napoca
	Szilard	Enyedi			Technical University of Cluj-Napoca

15:00 – 17:00, 13^th May        2S4. Robotics

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 359

Chairmen
Gheorghe Lazea	Technical University of Cluj-Napoca
Cornel  Brisan	Technical University of Cluj-Napoca
R. Robotin	Technical University of Cluj-Napoca

2S4-1	The simulation of time-optimal control for robotic arms
	Angela	EGRI		University of Petrosani
2S4-2	Inverse Dynamics of a 3-TTRS parallel manipulator using equivalent lumped masses
	Tiberiu	ITUL		Technical University of Cluj-Napoca
	Doina	Pisla		Technical University of Cluj-Napoca
2S4-3	Hybrid goal acquisition system for pioneer 2 mobile robot
	Radu		ROBOTIN	Technical University of Cluj-Napoca
	Gheorghe		Lazea	Technical University of Cluj-Napoca
	Sorin		Herle	Technical University of Cluj-Napoca
2S4-4	Virtual model and simulation for a new type of  machine tools
	Cornel		BRISAN	Technical University of Cluj-Napoca
	Manfred		Hiller	Duisburg-Essen University, Germany
2S4-5	Robot E_laboratory
	Ciprian	COMSA		IPA SA CIFATT Craiova
	Robert	Mitrica		IPA SA CIFATT Craiova
	Gabriel	Vladut		IPA SA CIFATT Craiova
2S4-6	Reconfigurable architecture to estimate the motion of an  underwater vehicle
	Viorela	ILA		University of Girona, Spain
	Rafa	Garcia		University of Girona, Spain
	Joachim	Batlle		University of Girona, Spain

17:00 – 17:30, 13^th May 3P1. -  POSTER SESSION

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - room 45

Chairmen
Florin Covaciu	IPA SA Cluj-Napoca Subsidiary
Gicu Ungureanu	IPA SA Cluj-Napoca Subsidiary
Cristian Vlasin	Technical University of Cluj-Napoca

P1-1

Stepper motor control with specialized integrated circuits

Alexandru

MORAR

“Petru Maior” University of Tg. Mures

P1-2

The user interface as a document

Adriana-Mihaela

TARTA

"Babes-Bolyai" University of Cluj-Napoca

P1-3

Using virtual instrument in D.C. motor simulation

Nicolae

PATRASCOIU

University of Petrosani

Adrian Marius

Tomus

University of Petrosani

P1-4

Oxygen content analysis with current sensors

Elena Maria

PICA

Technical University of Cluj-Napoca

Mihaela Ligia

Unguresan

Technical University of Cluj-Napoca

Lorentz

Jantschi

Technical University of Cluj-Napoca

P1-5

The removal of waste water from healthcare units- monitoring strategies and risk assessment

Monica

POPA

Univ. of Medicine and Pharmacy Cluj-Napoca

Daniela

Curseu

Univ.of Medicine and Pharmacy Cluj-Napoca

Dana

Sirbu

Univ.of Medicine and Pharmacy Cluj-Napoca

Andrei

Achimas

Univ.of Medicine and Pharmacy Cluj-Napoca

P1-6

Multimedia interactive mathematics courseware: defined integral applications.

Manuela

PANOIU

“Politehnica “ University of Timisoara, Faculty of Hunedoara

Caius

Panoiu

“Politehnica” University of Timisoara, Faculty of Hunedoara

Mihaela

Osaci

“Politehnica”University of Timisoara,  Faculty of Hunedoara

P1-7

A comparative study on the efficiency of asynchronous search techniques in the distributed constraint satisfaction problem

Ionel

MUSCALAGIU

"Politehnica" Univ. of Timisoara, Faculty of Hunedoara

P1-8

Optimal positioning of gsm antennas by using genetic algorithms

Corina

ROTAR

“1 Decembrie 1918” University of Alba Iulia

Ioan

Ienciu

“1 Decembrie 1918” University of Alba Iulia

P1-9

Aspects regarding the data loggers  for a ground-water monitoring system

Camelia

BODI

IPA SA Cluj-Napoca Subsidiary

Bela-Zoltan

Gyurka

IPA SA Cluj-Napoca Subsidiary

P1-10

Flammable gas portable detector  using microcontroller

Levente

TAMAS

IPA SA Cluj-Napoca Subsidiary

Rodica

Meza

IPA SA Cluj-Napoca Subsidiary

Bela-Zoltan

Gyurka

IPA SA Cluj-Napoca Subsidiary

P1-11	Data acquisition system for monitoring large  dams based on PLCs
	Istvan	KOVACS		IPA SA Cluj-Napoca Subsidiary
	Dan	Meza		IPA SA Cluj-Napoca Subsidiary
	Viorel	Catana		IPA SA Cluj-Napoca Subsidiary
	Bojor	Nicolae		IPA SA Cluj-Napoca Subsidiary
	Alina	Calarasu		IPA SA Cluj-Napoca Subsidiary
P1-12	Optimal control of working regim and energy consumption in open  pits excavatating process
	Ileana		HAMBURG	IAT Germany
	Doru Ion		Bucur	Company of Lignit –CNLO EMC Husnicioara
	Ion		Mircea	University of Craiova, Electrotechnic Faculty
	Gabriel		Vladut	IPA CIFATT Craiova
	Camelia		Cojocaru	IPA CIFATT Craiova
P1-13	Java application for encryption/decryption of files or folders through a graphical menu
	Marius		MARIAN	Technical University of Cluj-Napoca
	Gabriela		Chira	Pro3Soft of Cluj-Napoca
	Gavril		Toderean	Technical University of Cluj-Napoca
P1-14	Wavelet transform based characteristic points detection on ECG signals
	Zoltan	GERMAN-SALLO			Petru Maior University of Tg. Mures
P1-15	Calculation tool for a power factor correction boost converter with borderline control
	Cristian	FARCAS			Technical University of Cluj-Napoca
	Gabriel	Oltean			Technical University of Cluj-Napoca
	Mihai	Crasi			Technical University of Cluj-Napoca
	Cornelia	Farcas			Technical University of Cluj-Napoca

17:30– 19:30, 13^th May       4S.  SESSIONS

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street)

17:30– 19:30, 13^th May       4S1. Industrial Application

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) – Room 359

Chairmen
Serban Agachi	"Babes Bolyai" University Cluj-Napoca
Eugen Stancel	IPA SA Cluj-Napoca Subsidiary
Lucian Aruncutean	IPA SA Cluj-Napoca Subsidiary

4S1-1	Design and implementation of industrial communication network interfaces
	Gheorghe			SEBESTYEN				Technical University of Cluj-Napoca
	Kalman			Pusztai				Technical University of Cluj-Napoca
4S1-2	Automatic billing system for Cisco analog telephone adaptor ATA 186/188
	Rosen	IVANOV					Technical University of Gabrovo, Bulgaria
4S1-3	The study of temperatures distribution for capacitor-type bushing
	Silvius-Dorel					NEDELCUT			Research, development and testing national institute for electrical engineering - ICMET- Craiova
	Gheorghe				Floriganta				University of Craiova, Electrotechnical Faculty
4S1-4	A general modular design of ELIN filters based on  F^-1NF models
	Lelia		FESTILA				Technical University of Cluj-Napoca,
	Marina		Topa				Technical University of Cluj-Napoca,
	Sorin		Hintea				Technical University of Cluj-Napoca,
	Mihaela		Cirlugea				Technical University of Cluj-Napoca,
	Robert		Groza				Technical University of Cluj-Napoca,
4S1-5	Implementing an adaptive noise cancelling system  using TMS320C31 DSP
	Nicoleta			STROIA			Technical University of Cluj-Napoca,
	Daniel			Moga			Technical University of Cluj-Napoca,
	Petru			Dobra			Technical University of Cluj-Napoca,
	Radu A.			Munteanu			Technical University of Cluj-Napoca,
	Mihai R.			Dumitrean			Technical University of Cluj-Napoca,
4S1-6	An abstract load-balancing architecture for large scale multi-agent systems
	Lucian		BUSONIU				Technical University of Cluj Napoca
	Liviu		Miclea				Technical University of Cluj Napoca
	Szilard		Enyedi				Technical University of Cluj Napoca

17:30– 19:30, 13^th May       4S2. Measurement and Quality

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 356

Chairmen
Lelia Festila	Technical University of Cluj-Napoca
Daniel Moga	Technical University of Cluj-Napoca
Sorin Herle	Technical University of Cluj-Napoca

4S2-1	Total quality of service provisioning in middleware and applications
	Cosmina				IVAN				Technical University of Cluj-Napoca
4S2-2	Distributed agent-based monitoring and diagnosis for large-scale systems
	Honoriu				VALEAN				Technical University of Cluj-Napoca
	Tiberiu				Letia				Technical University of Cluj-Napoca
	Adina				Astilean				Technical University of Cluj-Napoca
4S2-3	The international accreditation of educational programs and ISO 9000 standards
	Tatiana			MAZUROVA			Taganrog State University of Radio-Engineering, Russia
	Nikolay			Zagrai			Taganrog State University of Radio-Engineering,  Russia
	Valentin			Galalu			Taganrog State University of Radio-Engineering,  Russia
4S2-4	On-line monitoring and fault diagnosis of induction machines - state-of-the-art
	Peter		BIKFALVI			University of Miskolc, Hungary
	Radu		Munteanu			Technical University of Cluj-Napoca
4S2-5	High precision level measurement system
	Aliodor				BALAJ				IPA SA Cluj-Napoca Subsidiary
	Gicu				Ungureanu				IPA SA Cluj-Napoca Subsidiary
	Florin				Covaciu				IPA SA Cluj-Napoca Subsidiary
	Cristian				Ciulbea				SC Hidroelectrica SA-SH Cluj
4S2-6	Distance learning in control based on client-server applications - a case study
	C.	MAHULEA							Technical University "Gh. Asachi" of Iasi
	C.	Lefter							Technical University "Gh. Asachi" of Iasi
	M.	Matcovschi							Technical University Gh. Asachi of Iasi
	O.	Pastravanu						Technical University Gh. Asachi of Iasi

17:30– 19:30, 13^th May       4S3. Software Application (part 1)

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 40

Chairmen
Tiberiu Letia	Technical University of Cluj-Napoca
Dorina Capatana	IPA SA Cluj-Napoca Subsidiary
Daniela Pop	IPA SA Cluj-Napoca Subsidiary

4S3-1	The usability of software systems or how hard is to make things simple
	Adriana-Mihaela			TARTA		"Babes-Bolyai" University of Cluj-Napoca,
4S3-2	Installation and configuration issues about FreeBSD operating system
	Lorentz		JANTSCHI		Technical University of Cluj-Napoca
	Sorana		Bolboaca		Medicine and Pharmacy University of Cluj-Napoca
4S3-3	Model-oriented programming versus component-based software engineering
	Ioan		JURCA		“Politehnica” University of Timisoara
	Emanuel		Tundrea		"Emanuel" University of Oradea
4S3-4	Feature extraction for continuous speech recognition
	Alexandru		CARUNTU		Technical University of Cluj-Napoca
	Gavril		Toderean		Technical University of Cluj-Napoca
	Liviu		Miclea		Technical University of Cluj-Napoca
4S3-5	A better representation for class relationships in UML using OFL meta-information
	Dan		PESCARU		"Politehnica" University of Timisoara
	Philippe		Lahire		University “ Sophia Antipolis”  Nice
	Ciprian		Chirila		"Politehnica" University of Timisoara
	Emanuel		Tundrea		"Politehnica" University of Timisoara
4S3-6	LabView on small target
	Silviu	FOLEA			Technical University of Cluj-Napoca
	Marius	Ghercioiu			National Instruments USA
	Horia	Hedesiu			Technical University of Cluj-Napoca
	Gratian	Crisan			National Instruments USA
	Ciprian	Ceteras			National Instruments USA
	Ioan	Monoses			National Instruments USA

17:30– 19:30, 13^th May       4S4. Software Application (part 2)

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 41

Chairmen
Adina Astilean	Technical University of Cluj-Napoca
Ovidiu Ghiran	IPA SA Cluj-Napoca Subsidiary
Aliodor Balaj	IPA SA Cluj-Napoca Subsidiary

4S4-1	Modular embedded system
	Marius	GHERCIOIU			National Instruments USA
	Silviu	Folea			Technical University of Cluj-Napoca
	Horia	Hedesiu			Technical University of Cluj-Napoca
	Ciprian	Ceteras			National Instruments USA
	Gratian	Crisan			National Instruments USA
	Ioan	Monoses			National Instruments USA
4S4-2	Improved quad-tree generation of ordered dithering mask
	Radu-Lucian			LUPSA	"Babes-Bolyai" University of Cluj-Napoca
4S4-3	Ethernet-based remote monitoring in widely  distributed plants
	Sorin	IGNAT			IPA SA Cluj-Napoca Subsidiary
	Dorina	Capatîna			IPA SA Cluj-Napoca Subsidiary
	Ovidiu	Ghiran			IPA SA Cluj-Napoca Subsidiary
4S4-4	A solution for providing pseudo dynamic discovery for XML Web services
	Cristian		DONCIULESCU			Middlesex University, London, England
	Luminita		Vasiu			Middlesex University, London, England
4S4-5	A hybrid biometric-enhanced authentication system for Electronic and Mobile Commerce
	Rachid		BENCHEIKH		Middlesex University, London, England
	Luminita		Vasiu		Middlesex University, London, England
4S4-6	Enhancing security in Jini networking technology
	Nikolaos		PAPAMICHAIL		Middlesex University, London, England
	Luminita		Vasiu		Middlesex University, London, England

17:30 - 19:30, 13^th May 4M. MULTIMEDIA SESSIONS

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) – Room 19 B

Chair: Honoriu Valean

17:30 – 18:00, 13^th May 4M1. Robotics

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) – Room 19 B

Chairmen
Gheorghe Lazea	Technical University of Cluj-Napoca
Cornel Brisan	Technical University of Cluj-Napoca
Radu Robotin	Technical University of Cluj-Napoca

4M1-1	Model based robot control with friction and payload estimation
	Marton		LORINC			Sapientia University, Tg. Mures
4M1-2	Robot manipulator controller based on adaptive learning rules
	Mirela			TRUSCA		Technical University of Cluj-Napoca
	Gheorghe			Lazea		Technical University of Cluj-Napoca
4M1-3	Independent robot joint controller with load torque observer
	Calin	RUSU				Technical University of Cluj-Napoca
	Iulian	Birou				Technical University of Cluj-Napoca
4M1-4	Robot motion using delaunay triangulation
	Ioan				ILEANA	"1 Decembrie 1918" University of Alba Iulia
	Ioana Maria				Ileana	"1 Decembrie 1918" University of Alba Iulia
	Corina				Rotar	Ecole Polytechnique, Paris, France
4M1-5	Determining the trajectory of the compensating counterweight for equilibrating a robot arm
	Ioan Ovidiu				COSTIN	Technical University of Cluj-Napoca
	Iulia				Costin	Technical University of Cluj-Napoca
4M1-6	Researches regarding the generalized motor forces for the TTRTR portal robot
	Ioan Ovidiu				COSTIN	Technical University of Cluj-Napoca
4M1-7	The inverse positional problem of the parallel robot
	Virgil		ISPAS			Technical University of Cluj-Napoca
4M1-8	Human prostheses
	Virgil		ISPAS			Technical University of Cluj-Napoca
4M1-9	Robotic arm drive
	Radu Mihai				CÂMPEANU	"Transilvania" University of Brasov, Electrical Engineering and Computer Science Faculty
	Ioan	Stoian				IPA SA Cluj-Napoca Subsidiary
	Sebastian			Covaci		“Transilvania” University of Brasov
	Gheorghe			Ratcu		“Transilvania” University of Brasov

18:00 – 18:30, 13^th May 4M2. Image Processing

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) – Room 19 B

Chairmen
Sergiu Nedevschi	Technical University of Cluj-Napoca
Mihaela Gordan	Technical University of Cluj-Napoca
Ovidiu Dancea	IPA SA Cluj-Napoca Subsidiary

4M2-1	Representation of real world objects in 3D
	Arpad	INCZE				"1 Decembrie 1918" University of Alba Iulia
4M2-2	Autoassociative neural network using CGH for neurons interconnection
	Ioan		ILEANA			"1 Decembrie 1918" University of Alba Iulia
	Rotar		Corina			"1 Decembrie 1918" University of Alba Iulia
	Joldes		Remus			"1 Decembrie 1918" University of Alba Iulia
	Risteiu		Mircea			"1 Decembrie 1918" University of Alba Iulia
4M2-3	Managing digital display design DVI vs HDCP
	Laurentiu			GAVRA		Tedelco SRL, Cluj-Napoca
	Gavril			Toderean		Tehnical University Cluj Napoca
4M2-4	Speeding-up the SVM-based color image classifiers by using vector quantization
	Mihaela		GORDAN			Technical University of Cluj-Napoca
	Costin		Miron			Technical University of Cluj-Napoca
	Ioan		Stoian			IPA SA Cluj-Napoca Subsidiary
	Ovidiu		Dancea			IPA SA Cluj-Napoca Subsidiary
	George		Tepes			Technical University of Cluj-Napoca
4M2-5	Design of an image processing filter using the JBITS package
	Zoltan	BARUCH				Technical University of Cluj-Napoca
	Zoltan	Balazsi				Technical University of Cluj-Napoca
4M2-6	USB based image acquisition system for real-time applications
	Mihai R.			DUMITREAN		Technical University of Cluj-Napoca
	Daniel			Moga		Technical University of Cluj-Napoca
	Gabriel			Lazar		Technical University of Cluj-Napoca
	Florin			Hurgoi		Technical University of Cluj-Napoca
	Mihai			Munteanu		Technical University of Cluj-Napoca
	Gabriel Calin				Cret	University of Oradea

18:30 – 19:00, 13^th May 4M3. Testing. Quality of Life

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) – Room 19 B

Chairmen
Dan Steriu	"Politechnica" University of Bucharest
Peter Bikfalvi	University of Miskolc, Hungary
Ioan Nascu	Technical University of Cluj-Napoca
Rodica Meza	IPA SA Cluj-Napoca Subsidiary

4M3-1	Orthogonal arrays based pseudorandom numbers generator
	Tatyana		MAZUROVA					Taganrog State University of Radio-Engineering, Rusia
	Alexander			Chefranov				Eastern Mediterranean University, North Cyprus
4M3-2	CMOS current-mode high-precision exponential circuit with improved frequency response
	Cosmin		POPA				"Politehnica" University of Bucharest
4M3-3	Low-area CMOS active resistor independent on the bulk effect
	Cosmin		POPA						"Politehnica" University of Bucharest
4M3-4	Enhanced Committed Instruction Counting (ECIC): A scheme for error detection enhancement in COTS Processors
	Amir	RAJABZADEH								Sharif University of Technology, Tehran, Iran
	Seyed Ghassem					Miremadi				Sharif University of Technology, Tehran, Iran
4M3-5	Reliability and other problems of a new solution for long distance calls
	Szilard		ENYEDI						Technical University of Cluj-Napoca
	Liviu		Miclea						Technical University of Cluj-Napoca
	Gavril		Toderean						Technical University of Cluj-Napoca
4M3-6	The quality assurance in a drinking water supply
	Daniela		CURSEU						University of Medicine and Pharmacy of Cluj-Napoca
	Monica		Popa						University of Medicine and Pharmacy of Cluj-Napoca
	Dana		Sirbu						University of Medicine and Pharmacy of Cluj-Napoca
4M3-7	Methods to assess the perceived indoor air quality
	Monica		POPA						University of Medicine and Pharmacy of Cluj-Napoca
	Daniela		Curseu						University of Medicine and Pharmacy of Cluj-Napoca
	Dana		Sirbu						University of Medicine and Pharmacy of Cluj-Napoca
4M3-8	Neural networks feedback linearization for cancer chemotherapy control
	Alexandru				FLOARES				Oncology Institute of Cluj-Napoca, Artificial Intelligence Department
4M3-9	Wireless telematic system for home monitoring  of the cardio-respiratory chronic diseases
	Lucian		ARUNCUTEAN						IPA SA Cluj-Napoca Subsidiary
	Adriana		Manciu						IPA SA Cluj-Napoca Subsidiary
	Dorina		Capatina						IPA SA Cluj-Napoca Subsidiary
	Ioan		Stoian						IPA SA Cluj-Napoca Subsidiary
	Daniel		Leucuta						University of Medicine and Pharmacy of Cluj-Napoca
4M3-10	Role of information technology in automated  monitoring of wastewater from healthcare  establishments
	Rodica		MEZA						IPA SA Cluj-Napoca Subsidiary
	Ioan		Stoian						IPA SA Cluj-Napoca Subsidiary
	Monica		Popa						University of Medicine and Pharmacy of Cluj-Napoca
	Adriana		Manciu						IPA SA Cluj-Napoca Subsidiary
	Dan		Meza						IPA SA Cluj-Napoca Subsidiary

19:00 – 19:30, 13^th May 4M4. Advanced Control. Modeling and Simulation

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) – Room 19 B

Chairmen
Stefan Preitl	"Politehnica" University of Timisoara
Clement Festila	Technical University of Cluj-Napoca
Matei Vanatoru	University of Craiova
Petru Dobra	Technical University of Cluj-Napoca

4M4-1	Using neural networks in integrated numerical circuits and systems
	Remus	JOLDES			"1 Decembrie 1918" University of Alba Iulia
4M4-2	PID Auto-tuning algorithm for processes without time delay
	Ioan		NASCU		Technical University of Cluj Napoca
	Robin		de Keyser		Ghent University, EeSA-Department, Belgium
	Silviu		Folea		Technical University of Cluj Napoca
	Cristian		Vlasin		Technical University of Cluj Napoca
4M4-3	Automated monitor production line (NOKIA display products)
	Marius		PATKO			Technical University of Cluj Napoca, Automation Dept
4M4-4	Fuzzy controller for a shunt active power filter
	Cosmin		POPESCU			"Politehnica" University of Bucharest
4M4-5	Simulation and identifications of alternator transfer functions
	Emilian		CEUCA			"1 Decembrie 1918" University of Alba Iulia
4M4-6	An algorithm for the analysis of fractal-like structures and miscellaneous applications
	Mircea		OLTEANU			"Politehnica" University Bucharest
	Mihai		Tanase			“Politehnica” University Bucharest
4M4-7	Process monitoring for flexible manufacturing systems with error recovery
	Calin			CIUFUDEAN			"Stefan cel Mare" University of Suceava
	Constantin			Filote			"Stefan cel Mare" University of Suceava
	Adrian			Graur			"Stefan cel Mare" University of Suceava

4M4-8	Principles of design for large-scale neural simulators
	Raul	MURESAN			Technical University of Cluj-Napoca
	Iosif	Ignat			Technical University of Cluj-Napoca
4M4-9	Model predictive control of nonlinear processes using on-line simulation
	Radu		BALAN		Technical University of Cluj-Napoca
	Vistrian			Maties	Technical University of Cluj-Napoca
	Hancu			Olimpiu	Technical University of Cluj-Napoca
4M4-10	Dynamical nonlinear model of the wheel-rail slip  in railway traction by diesel-electric  locomotives with DC traction motors
	D.			BONTA	Technical University of Cluj-Napoca
	Eva			Dulf	Technical University of Cluj-Napoca
	Clement			Festila	Technical University of Cluj-Napoca
4M4-11	The Taylor  LIL method for analogical modelling  and numerical simulation for linear processes
	Eva			DULF	Technical University of Cluj-Napoca
	Mihai			Abrudean	Technical University of Cluj-Napoca
	Tiberiu			Colosi	Technical University of Cluj-Napoca
4M4-12	Mathematical techniques for optimization of the  power factor in energy processing systems
	Horia			ANDREI	"Valahia" University of Targoviste
	Costin			Cepisca	Politehnica University of Bucharest
	George			Enciu	Politehnica University of Bucharest
4M4-13	Robust control of field-oriented drive system with permanent-magnet synchronous servomotor
	Iulian			BIROU	Technical University of Cluj-Napoca
	Calin			Rusu	Technical University of Cluj-Napoca
4M4-14	Implementation of automatic voltage regulators  on real time targets
	Cosmin			BUCUR	"Ovidius" University of Constanta
	Paul			Burlacu	"Ovidius" University of Constanta
	Mihai			Alexa	"Ovidius" University of Constanta

Friday, 14^th May, 2004

08:30 – 10:30, 14^th May        5 S.  SESSIONS

(Technical University of Cluj-Napoca, 26-28 G.Baritiu Street)

08:30 – 10:30, 14 ^th May      5S1. Railway and Vehicle Control

(Technical University of Cluj-Napoca, 26-28 G.Baritiu Street) - Room 41

Chairmen
Dumitru Mihailescu	Ecological University of Bucuresti
Toma Dordea	Ecological University of Bucuresti
Eva Dulf	Technical University of Cluj-Napoca

5S1-1	Price based of centralized control for urban vehicle traffic
	Tiberiu		LETIA	Technical University of Cluj-Napoca
	Mihai		Hulea	Technical University of Cluj-Napoca
	Honoriu		Valean	Technical University of Cluj-Napoca
5S1-2	Controller drive installation for the locomotives  of type LDE 2100/LDH 1250
	Sorin	MONTESCU		SC SOFTRONIC SRL
5S1-3	The Diesel locomotive with vectorial command  system for asynchrony traction engines and the  estimation of the rotor time constant
	Calin		GRATIAN	Romanian Railway Co
	Dumitru		Mihailescu	Ecological University of Bucuresti
	Stefan		Duduman	Ecological University of Bucuresti
5S1-4	The main generator field current regulating system for  static switch 2100CP Diesel-electrical engines
	Remus	MATUSA		PROMAT Craiova
	Florin	Sanda		PROMAT Craiova
	Novac	Alexandru		PROMAT Craiova
5S1-5	Analysis of the multi-model anti-slip control  with DC traction motors by Diesel electric  locomotives
	D.		BONTA	Technical University of Cluj-Napoca
	Eva		Dulf	Technical University of Cluj-Napoca
	Clement		Festila	Technical University of Cluj-Napoca
5S1-6	Three-phase driving system for tramways
	Florea		BURDUBUS	INDA S.R.L. Craiova
	Mihail		Radulescu	INDA S.R.L. Craiova
	Razvan		Prejbeanu	INDA S.R.L. Craiova

5S1-7	Control and protection equipment for the  auxiliary services of the electric locomotives
	Constantin		PATRASCU		University of Craiova
	Vasile		Tulbure		Romanian Railway Co
	Calin		Gratian		Romanian Railway Co
5S1-8	An application for the evaluation of professional  knowledge – referring to the CFR employers
	Georgeta Emilia			MOCUTA	“Politehnica” University of Timisoara
	Amalia	Halmagean			“Politehnica” University of Timisoara

08:30 – 10:30, 14^th May        5S2. Quality of Life

(Technical University of Cluj-Napoca, 26-28 G.Baritiu Street) - Room 356

Chairmen
Ioan Nascu	Technical University of Cluj-Napoca
Rodica Meza	IPA SA Cluj-Napoca Subsidiary
Tamas Levente	IPA SA Cluj-Napoca Subsidiary

5S2-1	Cardiological parameters extraction from echocardiographic images using virtual instrumentation
	Mihai-Dan			STERIU	“ Politehnica” University of Bucharest
	Nicolae			Paun	University of Medicine and Pharmacy Carol Davila-CARITAS Hospital
	Josef	Friedmann			“Politehnica” University of Bucharest
5S2-2	Patients Monitor System based on the Bluetooth Technology
	Adina		ASTILEAN		Technical University of Cluj-Napoca
	Tiberiu		Letia		Technical University of Cluj-Napoca
	Honoriu		Valean		Technical University of Cluj-Napoca
	Camelia		Avram		Technical University of Cluj-Napoca
5S2-3	An ultra-sound and doppler medical image  analysis framework
	Ioan		STOIAN		IPA SA Cluj-Napoca Subsidiary
	Ovidiu		Dancea		IPA SA Cluj-Napoca Subsidiary
	Mihaela		Gordan		Technical University of Cluj-Napoca, Basis of Electronics Department
	Adina		Stoian		L’Hospital Universitaire Reims, France
	Gratian		Botis		UMF Medical Clinic no. 3, Cluj-Napoca
5S2-4	Database used in ultrasonic medical  investigations
	Maria		Mircea		IPA SA Cluj-Napoca Subsidiary
	Radu		Badea		U.M.F.  Medical Clinic no. 3
	Dorina		Capatina		IPA SA Cluj-Napoca Subsidiary
	Adina		Stoian		U.M.F.  Medical Clinic no. 3
	Sorin		Ignat		IPA SA Cluj-Napoca Subsidiary
	Daniela		Pop		IPA SA Cluj-Napoca Subsidiary
5S2-5	Tools and methodology for DICOM SR in echocardiography
	Sergiu	NEDEVSCHI			Technical University of Cluj-Napoca
	D	Olinic			University of Medicine and Pharmacy of Cluj-Napoca
	I	Popa1			Technical University of Cluj-Napoca
	F	Rusu			Technical University of Cluj-Napoca
	A	Smeu			Technical University of Cluj-Napoca
	A	Vancea			Technical University of Cluj-Napoca
	C.	Homorodean			University of Medicine and Pharmacy of Cluj-Napoca
5S2-6	Medical image-guidance and robotics from a software perspective
	Mihai	MOCANU			University of Craiova

08:30 – 10:30, 14^th May       5S3. Image Processing

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) – Room 359

Chairmen
Sergiu Nedevschi	Technical University of Cluj-Napoca
Mihaela Gordan	Technical University of Cluj-Napoca
Ovidiu Dancea	IPA SA Cluj-Napoca Subsidiary

5S3-1	An optimal feature selection strategy for fuzzy c-means. Application to lip-to-skin discrimination
	Mihaela				GORDAN	Technical University of Cluj-Napoca
	Costin				Miron	Technical University of Cluj-Napoca
	Apostolos				Georgakis	Aristotle University of Thessaloniki, Greece
5S3-2	Calibration of an off the shelf camera. The use of DFF techniques in a mobile  robots control
	Lluís	PACHECO				University of Girona Spain
	Xevi	Cufi				University of Girona Spain
	Jordi	Cifuentes				University of Girona Spain
5S3-3	Supervised Object Knowledge Learning for Image Understanding
	Anna		BOSCH			University of Girona Spain
	Xavier		Muñoz			University of Girona Spain
	Jordi		Freixenet			University of Girona Spain
	Joan		Marti			University of Girona Spain
5S3-4	Real-time classification method for detecting road region in variant environment
	Pangyu			JEONG		Technical University of Cluj-Napoca
	Sergiu			Nedevschi		Technical University of Cluj-Napoca

5S3-5	Dynamic traffic description using stereovision equipped vehicles and ad-hoc wireless networking
	Sergiu		NEDEVSCHI			Technical University of Cluj-Napoca
	Radu		Danescu			Technical University of Cluj-Napoca
	Dan		Frentiu			Technical University of Cluj-Napoca
	Tiberiu		Marita			Technical University of Cluj-Napoca
	Florin		Oniga			Technical University of Cluj-Napoca
	Ciprian		Pocol			Technical University of Cluj-Napoca
5S3-6	The Generalized Elastodynamics Equations in Robotics
	Iuliu	NEGREAN			Technical University of Cluj-Napoca
	Darius-Gabriel			Albetel	Technical University of Cluj-Napoca

09:00 – 11:00, 14^th May 5M - MULTIMEDIA SESSIONS

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 19 B

Chair : Honoriu Valean

09:00 - 09:30, 14^th May 5M1. Measurement and Quality

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 19 B

Chairmen
Lelia Festila	Technical University of Cluj-Napoca
Daniel Moga	Technical University of Cluj-Napoca
Sorin Herle	Technical University of Cluj-Napoca

5M1-1

A low cost transport stream (TS) generator used in digital video broadcasting equipment measurements

Radu

ARSINTE

Technical University Cluj-Napoca

5M1-2

Indoor air quality evaluation

Sorin Nicolae

COCIORVA

Technical University of Civil Engineering of Bucharest

5M1-3

Rotor faults detection in squirrel-cage induction motors by current signature analysis

Loránd

SZABÓ

Technical University of Cluj-Napoca

Jeno Barna

Dobai

Technical University of Cluj-Napoca

Károly Ágoston

Biró

Technical University of Cluj-Napoca

5M1-4

The automation  unit  destined to modernize the atlas izotopic mass Spectrometer (AUMMS)

Nicolae

LUPSA

R&D National Institute -Isotopic and Molecular Technologies Cluj

Valentin

Mirel

R&D National Institute -Isotopic and Molecular Technologies Cluj

Stefan

Popescu

R&D National Institute -Isotopic and Molecular Technologies Cluj

Cornel

Cuna

R&D National Institute -Isotopic and Molecular Technologies Cluj

Stela

Cuna

R&D National Institute -Isotopic and Molecular Technologies Cluj

5M1-5

CMOS linearized differential amplifiers using strong inversion and bulk-driven weak inversion MOS transistors

Cosmin

POPA

“Politehnica” University of Bucharest

5M1-6

A low-cost educational project for teaching embedded systems

Albert

FAZAKAS

Technical University of Cluj-Napoca

Ali-Mostakhdemin

Hosseini

Innofors Research Centre, Forssa, Finland

Jari

Mustajärvi

Häme Polytechnic, Forssa Unit, Finland

5M1-7

Training and evaluation software for radioisotopes via Web

Mihaela Ligia

UNGURESAN

Technical University of Cluj-Napoca

Lorentz

Jantschi

Technical University of Cluj-Napoca

5M1-8

Training software for reaction kinetics via Web

Mihaela Ligia

UNGURESAN

Technical University of Cluj-Napoca

Lorentz

Jantschi

Technical University of Cluj-Napoca

5M1-9	Simple voltage – Hertz control with current feedback of the induction machine
	Ioan	INCZE		Technical University of Cluj-Napoca
	Maria	Imecs	Technical University of Cluj-Napoca
	Csaba	Szabó	Technical University of Cluj-Napoca

09:30 – 10:00, 14^th May 5M2. Applications

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 19 B

Chairmen
Serban Agachi	"Babes Bolyai" University Cluj-Napoca
Eugen Stancel	IPA SA Cluj-Napoca Subsidiary
Tiberiu Letia	Technical University of Cluj-Napoca
Ovidiu Ghiran	IPA SA Cluj-Napoca Subsidiary

5M2-1	The capacitance of an electric signal transducer
	Adriana	MICU		Energetics College, Cluj-Napoca
	Dan	Micu		Technical University, Cluj-Napoca
5M2-2	Advanced control of the agglomerating  process of the ferrous ores
	Stela	ANGHEL	« Politehnica » University of Timisoara
	Nicolae	Rusu	Politehnica University of Timisoara,   Faculty of Hunedoara
5M2-3	Process surveillance system for silicon-carbid  production
	Dorina	CAPATÎNA		IPA SA Cluj-Napoca Subsidiary
	Lucian	Aruncutean		IPA SA Cluj-Napoca Subsidiary
	Eugen	Stancel		IPA SA Cluj-Napoca Subsidiary
	Ioan	Stoian		IPA SA Cluj-Napoca Subsidiary
5M2-4	Water management model in a  hydrological basin
	Gicu	UNGUREANU		IPA SA Cluj-Napoca Subsidiary
	Lucian	Aruncutean		IPA SA Cluj-Napoca Subsidiary
	Florin	Covaciu		IPA SA Cluj-Napoca Subsidiary
	Aliodor	Balaj		IPA SA Cluj-Napoca Subsidiary
	Cristian	Ciulbea		SC Hidroelectrica SA-SH Cluj
5M2-5	Construction of a toric surface by interpolating a set of planar sections
	Mihai	DAMIAN		Technical University of Cluj-Napoca,
	Csaba	Gyenge		Technical University of Cluj-Napoca,
	Ildiko	Revnic		Technical University of Cluj-Napoca,
5M2-6	Automatic system for water quality monitoring, flood  predicting and environment protection in hydrographic  areas
	Gicu	UNGUREANU		IPA SA Cluj-Napoca Subsidiary
	Florin	Covaciu		IPA SA Cluj-Napoca Subsidiary
	Calin	Popita		IPA SA Cluj-Napoca Subsidiary
	Aliodor	Balaj		IPA SA Cluj-Napoca Subsidiary
	Cristian	Ciulbea		SC Hidroelectrica Cluj

5M2-7	Automated controlling system for butterfly valves on power channel
	Cristian		Ciulbea			SC Hidroelectrica SA-SH Cluj
	Gicu		Ungureanu			IPA SA Cluj-Napoca Subsidiary
	Florin		Covaciu			IPA SA Cluj-Napoca Subsidiary
	Aliodor		Balaj			IPA SA Cluj-Napoca Subsidiary
5M2-8	Internet-based control engineering laboratory
	Tudor			BUZDUGAN		Technical University of Cluj-Napoca
	Robin			De Keyser		Ghent University – EeSA Department
	Ioan			Nascu		Technical University of Cluj-Napoca
5M2-9	Ethernet data acquisition system
	Silviu		FOLEA			Technical University of Cluj-Napoca
	Ioan		Nascu			Technical University of Cluj-Napoca
	Cristian		Vlasin			Technical University of Cluj-Napoca
5M2-10	A method for color printer profile construction
	Radu-Lucian				LUPSA	“Babes-Bolyai” University of Cluj-Napoca
5M2-11	Configurability of a SCADA system – applied on  Somes river hidroelectric plants
	Ovidiu		GHIRAN			IPA SA Cluj-Napoca Subsidiary
	Dorina		Capatîna			IPA SA Cluj-Napoca Subsidiary
	Ioan		Stoian			IPA SA Cluj-Napoca Subsidiary
	Eugen		Stancel			IPA SA Cluj-Napoca Subsidiary
5M2-12	Hybrid modeling of complex surfaces using CATIA V5
	Mihai		DAMIAN			Technical University of Cluj-Napoca,
	Ildiko		Revnic			Technical University of Cluj-Napoca,
5M2-13	Aplications of distribution theory and properties in power electronic controller
	Emil		POP			University of Petrosani
	Monica		Leba			University of Petrosani
	Maria		Pop			University of Petrosani
5M2-14	Programmable logic device for control and protection in the electroenergetic systems
	Aron	POANTA				University of Petrosani
	Dan	Dojcsar				University of Petrosani

10:00 – 10:30, 14^th May 5M3. Junior Session

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 19 B

Chairmen
Dorin Isoc	Technical University of Cluj-Napoca
Silviu Folea	Technical University of Cluj-Napoca

Papers: Appendix  Program

10:30 – 11:00, 14^th May 5M4. Railway and Vehicle Control

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 19 B

Chairmen
Dumitru Mihailescu	Ecological University of Bucharest
Toma Dordea	Ecological University of Bucharest
Eva Dulf	Technical University of Cluj-Napoca

5M4-1	Numerical simulation version of a railway traction using asynchronous motors
	Vasile		TULBURE			Technical University of Cluj-Napoca
	Rodica		Festila			Technical University of Cluj-Napoca
	Eva		Dulf			Technical University of Cluj-Napoca
	Tiberiu		Colosi			Technical University of Cluj-Napoca
5M4-2	Equipment for electric locomotives control
	Constantin				GUTULESCU		SC SOFTRONIC SRL
5M4-3	Installation for electric locomotives driving with  brushless d.c. motor
	Augustin			POPESCU		SC SOFTRONIC SRL
5M4-4	Protection installation for the traction engines  of the electrical and electrical diesel  locomotives
	Gheorghe			VADUVA		SC SOFTRONIC SRL
5M4-5	Consideration regarding the behaviour of electrical insulated materials submitted to electrical fields
	Remus	MATUSA				PROMAT Craiova
	Florin	Sanda				PROMAT Craiova
	Calin	Gratian				Romanian Railway Co.
	Novac	Alexandru				PROMAT Craiova
5M4-6	Electric locomotive tap-changer drive system  using an AC motor
	Razvan			PREJBEANU		INDA S.R.L. Craiova
	Mihail			Radulescu		INDA S.R.L. Craiova
	Constantin			Patrascu		University of Craiova
	Jean			Stancioi		INDA S.R.L. Craiova

5M4-7	The electric locomotives le 5100 kw control using  a parallel, distributed computing system
	Constantin		PATRASCU			University of Craiova
	Calin		Gratian			Romanian Railway Co.
	Marius		Dobrin			INDA S.R.L. Craiova
5M4-8	Treatment of sliding phenomenon at the  Roumanian electric locomotives LE 5100 KW
	Mihail	RADULESCU				INDA S.R.L. Craiova
	Razvan	Prejbeanu				INDA S.R.L. Craiova
	Vasile	Tulbure				Romanian Railway Co.
	Marius	Dobrin				INDA S.R.L. Craiova
5M4-9	The shortening faults handling of high voltage lines loaded  by the electric traction dependent office
	Calin			GRATIAN	Romanian Railway Co.
	Remus			Matusa	PROMAT Craiova
	Florin			Sanda	PROMAT Craiova

10:30 – 11:00, 14^th May 6 P2 -  POSTER SESSION, Coffee break

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 45

Chairmen
Kovacs Istvan	IPA SA Cluj-Napoca Subsidiary
Paula Raica	Technical University of Cluj-Napoca
Florin Covaciu	IPA SA Cluj-Napoca Subsidiary
Cristian Vlasin	Technical University of Cluj-Napoca

P2-1	The influence of digital sampling in the electrical metrology
	Costin			CEPISCA				"Politehnica" University of Bucharest
	Horia			Andrei				“Valahia” University Târgoviste
	Cornelia			Cepisca				Electronica Industriala GR.SC. Bucuresti
	Stergios			Ganatsios				Technological Educational Institute of West Macedonia, Greece
	George			Seritan				“Politehnica” University of Bucharest
P2-2	Power Measurements with LabVIEW
	Valentin				DOGARU ULIERU						"Valahia" University of Târgoviste
	Costin				Cepisca						“Politehnica” University of Bucharest
	Horia				Andrei						"Valahia" University of Târgoviste
	Marcel				Ionel						"Valahia" University of Târgoviste
	Sorin				Popescu						"Valahia" University of Târgoviste
P2-3	Superior-order curvature-corrected CMOS voltage references: an original approach
	Cosmin					POPA			"Politehnica" University of Bucharest
P2-4	Analitical methods  quantify dependencies with multistate component models
	Vasile			DUB					"Petru Maior" University of Tg-Mures
	Horatiu			Grif					"Petru Maior" University of Tg-Mures
P2-5	Simple thermo-chamber for testing  electronic modules at high temperature
	Mircea Ilie					MIHAIU			University of Craiova
P2-6	Gripper test clips comparison with the Parrot clip
	Radu					FILIPESCU			Parrot Invent, Bucharest
P2-7	On the compression of the sonar images
	Dorel		AIORDACHIOAIE							"Dunarea de Jos" Galati University
P2-8	Video inspection system based on mobile video camera positioning  on 3 axis
	Ioan		LOVASZ						IPA SA Cluj-Napoca Subsidiary
	Mihail		Abrudean						IPA SA Cluj-Napoca Subsidiary
	Ioan		Stoian						IPA SA Cluj-Napoca Subsidiary
	Alina		Calarasu						IPA SA Cluj-Napoca Subsidiary
	Calin		Popita						IPA SA Cluj-Napoca Subsidiary
P2-9	Analysis of the quality of the electric power for the railway station
	Ioan	BACIU					Technical University of Timisoara, Faculty of Hunedoara
	Manuela				Panoiu		Technical University of Timisoara,  Faculty of Hunedoara
	Caius			Panoiu			Technical University of Timisoara, Faculty of Hunedoara

P2-10	Worst case analysis- Methods used for design verification  in the automotive electronics industry
	Constantin			CIOLOFAN		INAS Craiova
	Mircea Ilie			Mihaiu		University of Craiova
	Pompilian			Tofilescu		INAS Craiova
P2-11	New Formulations about Dynamic Accuracy in Robotics
	Iuliu	NEGREAN				Technical University of Cluj-Napoca
	Dan-Calin		NEGREAN			Technical University of Cluj-Napoca
P2-12	PENDULAR control systems trial to unify control design approaches
	Catalin Nicolae				CALISTRU		Gheorghe Asachi Technical University of Iasi
P2-13	Simulations of underwater vehicle dynamics
	Paul	BURLACU				Naval Academy of Constanta
	Cosmin		Bucur			Naval Academy of Constanta
	Mihai		Alexa			Naval Academy of Constanta

11:30 – 13:00, 14^th May        7 PS2.  PLENARY SESSION II

(Technical University of Cluj-Napoca, 26-28 G. Baritiu Street) - Room 40

PS2-1	Hydro-electric power plants SCADA system - applied on Somes river
	Ioan	STOIAN						IPA SA Cluj-Napoca Subsidiary
	Dorina	Capatîna						IPA SA Cluj-Napoca Subsidiary
	Ovidiu	Ghiran						IPA SA Cluj-Napoca Subsidiary
	Eugen	Stancel						IPA SA Cluj-Napoca Subsidiary
PS2-2	A new methodology for designing e-manufacturing platforms within Virtual Enterprises
	Aurealian Mihai				STANESCU					"Politehnica" University of Bucharest
	Jean-Claude				Hennet					LAAS-CNRS, France
	Carmen-Luisa				Diaconescu					"Politehnica" University of Bucharest
PS2-3	Evaluating surface texture prediction  when seen from different distances
	X.		LLADÒ					University of Girona Spain
	Viorela		Ila					University of Girona Spain
	Jordi		Freixenet					University of Girona Spain
	J.		Marti					University of Girona Spain
PS2-4	Analog modeling variant of a railway traction by means of asynchronous motors
	Vasile	TULBURE							Technical University of Cluj-Napoca
	Rodica	Festila							Technical University of Cluj-Napoca
	Eva	Dulf							Technical University of Cluj-Napoca
	Tiberiu	Colosi							Technical University of Cluj-Napoca
PS-5	On a scientometric procedure for the evaluaton of the romanian innovative potential in R & D
	Constantin			RÂNEA		Ministry of Education and Research
	Dan C.	Badea				CENTIREM at the R & D National Institute for Radioactive Metals and Resources
PS-6	Integrated production – state of the art
	Marcel			POPA		SC Tehnoton SA Iasi
PS-7	Process control system
	Nicolae			MISCOCI			SC Siemens SRL Romania, Bucharest